View Services

CNC Tube Laser CuttingView Details
CNC Tube Laser CuttingView Details
Laser–Fab is equipped with 1x TRUMPF Tube 7000 CNC Tube Laser.
The Tube Laser is great for :
  • Hand Rails / Railings
  • Ladders
  • Safety Guards
  • Bumpers
  • Coping/Beveling Pipe
  • Perforating Pipe
  • Self Jigging Assemblies & Weldments
  • Saving Time & Money
  • Process Pipe, Tube, HSS, Channel, Angle
  • Cut holes, slots, bevel, cope, and other complicated designs, while achieving the proper finished length, all in one process.
  • 30' raw material Loading Length & 20' Processed Parts Unloading Length
  • 25lb/ft maximum raw material weight
  • Maximum Round Profiles - 10" diameter tube, 8" Sch 40 Pipe
  • Maximum HSS Profiles - 7"x7"x5/16" HSS, 8"x6"x5/16" HSS, 10"x4"x5/16" HSS
  • Maximum Channel Profile - 5" Channel
  • Maximum Angle Profiles - 5"x3" Angle, 4"x4" Angle
  • Maximum Thicknesses - 1/2" Mild Steel, 3/8" Stainless, 1/4" Aluminum (contact us to confirm thickness and profile capability)
  • LoadMaster Tube Self-Loading system, able to hold 9,000 lbs
CNC Flat Sheet Laser CuttingView Details
CNC Flat Sheet Laser CuttingView Details

Laser-Fab has three TRUMPF Flat Sheet Lasers

Laser Cutting :

  • – is highly accurate and precise
  • – cost-effective
  • – can handle complex geometries
  • – causes no damage or warping
  • – has higher sheet utilization
TRUMPF TruLaser 3040 Fiber (10,000W) Sheet Laser
  • 80" wide X 160" long bed, to handle 72" x 144" material
  • Maximum Thicknesses - 1" Mild Steel, 1" Stainless, 1/2" Aluminum
  • 10,000W Fiber
TRUMPF TruLaser L3040 (6000W) Sheet Laser
  • 80" wide X 160" long bed, to handle 72" x 144" material
  • Maximum Thicknesses - 1" Mild Steel, 3/4" Stainless, 1/2" Aluminum
  • 6000W Resonator
Laser-Fab can cut these Materials :
  • 1.00" thick to 24ga (0.024") thick Mild Steel
  • 1.00" thick to 24ga (0.024") thick Stainless
  • 1/2" (0.50") thick to 0.024" thick Aluminum
Materials stocked by Laser-Fab :
  • Mild Steel, Hot-Rolled, Cold-Rolled, Checker Plate
  • QT100, AR400, A516-Gr70
  • Galvanized, Satin Coat
  • Stainless - 304, 316, 4B, 2B
  • Aluminum - 5052, 6061, 3003 Checker Plate
  • Perforated, Expanded Mesh
PEM Nuts / Rivet NutsView Details
PEM Nuts / Rivet NutsView Details
Laser-Fab is equipped with PEM and RIVET Nut Insertion tools.

PEM Nuts and Rivet Nuts replace weld-nuts or loose nuts, making assembly easier, saving time and money during manufacturing, assembly, and maintenance.

HAEGER 824 Insertion Machine
  • Ability to insert Nuts, Studs, Pins, Standoffs
  • Maximum PEM size of 3/8"
  • Insert into Sheet & Plate (Mild, Aluminum, Stainless)
  • 8 tons (72kN) of ram force; 24 inch (610mm) throat depth
  • Includes Positive Stop Cylinder and Dwell Timer
  • Fully hydraulic; PLC electrical controls
ATLAS RIVET NUT Installation Tooling
  • Round and Hex Riv-Nuts
  • Insert into Sheet Metal & HSS
  • Maximum Rivet Nut size of 3/8"
CNC FormingView Details
CNC FormingView Details
Laser-Fab is equipped with 3x TRUMPF CNC Press Brakes.

The TRUMPF 5230 TruBend Press Brakes have 253 tons of press force.  Both of Laser-Fab’s 5230 Press Brakes are equipped with Auto Angle Measurement. With the programmability of the TruBend 5000 series the machines are ideal for series production. Even with multiple bends per part, the repeatability is precise and efficient.

The TRUMPF 7036 TruBend Press Brake has 40 tons of press force and 40″ wide tool bed to handle smaller parts.

TRUMPF 5230 TruBend CNC Press Brake - 167" wide
  • 167" wide Tool Bed
  • 253 Ton Press Force
  • Independent 6-Axis Back Gauge
TRUMPF 5230 TruBend CNC Press Brake - 144" wide
  • 144" wide Tool Bed
  • 253 Ton Press Force
  • Fixed Back Gauge
TRUMPF 7036 TruBend CNC Press Brake
  • 40" wide Tool Bed
  • 40 Ton Press Force
  • Electric over Hydraulic
CNC Welding CellView Details
CNC Welding CellView Details

LINCOLN ELECTRIC System 65 Welding Cell with FANUC Robotic Arm

  • Mild & Stainless Welding
  • 84" Long x 40" Wide x 40" Deep Workspace
  • 2000 lb weight capacity
  • H-Frame Positioner for the ability to unload/load parts while the Welding Cell is welding in the welding zone
WeldingView Details
WeldingView Details
Laser-Fab is equipped with skilled welders, and is CWB Certified (CSA W47.1)
Welding Projects:
  • Electrical Cabinets
  • Panels
  • Fuel Tanks
  • Hydraulic Tanks
  • Skid Bases
  • Skid Enclosures
  • Airport Conveyors
  • Pump Stands
  • Belt Guards
  • Laser-Fab does MIG, TIG, and Flux Core welding. Stick Welding is available.
  • Mild Steel, Stainless, and Aluminum Welding
CNC RollingView Details
CNC RollingView Details
Laser-Fab is equipped with 2 Rollers.
  • 1x CNC Roller : 41″ wide X 3/16″ Mild Steel Thickness
  • 1x Non-CNC Roller : 60″ wide X 1/4″ Mild Steel Thickness
MG CNC Roller
  • 41" wide x 3/16" Mild Steel Thick Maximum
  • 5" Diameter minimum Inside Diameter (depending on thickness)
  • Excellent for Repeatability and Large Quantities
  • Ability to provide Cone Rolling (depending on thickness and angle)
Famar Non-CNC Roller
  • 60" wide x 1/4" Mild Steel Thick Maximum
  • 7" Diameter minimum Inside Diameter (depending on thickness)
AssemblyView Details
AssemblyView Details
  • Laser-Fab is equipped with the facilities and capabilities tee assemble a variety of projects.
  • With a 70,000 square foot facility we have an assembly area to assemble Skids, Enclosures, Furniture, Conveyors, etc.
MachiningView Details
MachiningView Details
Laser-Fab Machining Equipment :
  • HAAS VF-3 CNC Vertical Mill
  • HAAS TL-2 CNC Lathe
  • 3x FLEX-ARM Tapping Drills
HAAS VF-3 CNC VERTICAL MILL
  • 3 Axis, 40 Taper, 8.1k RPM
  • Travels - X-Axis 40", Y-Axis 20", Z-Axis 25"
  • Table Size - 48" long X 19" wide
  • Tool Changer - 30+1 Side-Mount
HAAS TL-2 CNC LATHE
  • 11" Maximum Diameter
  • 48" Center to Center Length
  • Accurate Repeatability with Reduced Production Time
  • Rollers, Bushings, Pipe Threading
FLEX-ARM TAPPING DRILLS
  • Tapping as Small as 8-32
  • Tapping as Large as 3/4"
Laser MarkingView Details
Laser MarkingView Details
Epilog Fusion PRO 36 Dual CNC Laser
36″ x 24″ Work Area.  Up to 165 inches/second Raster Speed.
Dual Power Source – 30W Fiber & 60W CO2
Up to 1200 dpi Resolution

 

We can Etch very detailed shapes, text, and images onto a wide range of materials:
  • Stainless Steel
  • Anodized Aluminum
  • Plastics
  • Tile
  • Marble
  • Glass
  • Wood
PaintingView Details
PaintingView Details
Laser-Fab is equipped with a Lemmer compressed air painter with a full ex-haust paint booth.
  • Colour matching is available if required
  • Powder Coating is available if required
BandsawsView Details
BandsawsView Details
Laser-Fab is equipped with two Hyd-Mech Bandsaws.
  • 16” Maximum Outside Diameter
  • 45 degree Mitre Saw
Commonly Stocked MaterialsView Details
Commonly Stocked MaterialsView Details
Laser-Fab carries a large selection of sheet, plate, and structural material in-stock.

With Laser-Fab’s 50,000 sq. ft facility, Laser-Fab can make sure they have material available for large and repeatable requests.

Laser-Fab stocks 4’x8′ sheets to 6’x12′ sheets.

Laser-Fab stocks Mild Steel, Stainless Steel, Aluminum, Galvanized, and Checker Plate (Aluminum and Mild Steel) in sheets/plates.

Laser-Fab stocks a variety of Square Tube, Rectangular Tube, Round Tube, Pipe, Flat Bar, Angle, and Channel.

Sheet / Plate Inventory
  • Mild Steel, Hot-Rolled, Cold-Rolled, Checker Plate
  • QT100, AR400, A516-Gr70
  • Galvanized, Satin Coat
  • Stainless - 304, 316, 4B, 2B
  • Aluminum - 5052, 6061, 3003 Checker Plate
  • Perforated, Expanded Mesh
Structural Inventory
  • HSS
  • Pipe
  • Tube
  • Flat Bar
  • Angle
  • Channel
Delivery ServicesView Details
Delivery ServicesView Details
Laser-Fab is equipped with trucks to deliver parts and assemblies.
  • 1 Ton Flat Deck Truck with a 30′ Flat deck Gooseneck Trailer
  • 1 Ton Flat Deck Truck
  • 5 Ton 24′ Flat Deck Truck with Curtain Sides

 

Weekly Deliveries to Calgary, Tuesdays and Thursdays.

Weekly Deliveries to Lethbridge and Red Deer.

Couriered Deliveries and Pick-ups can be arranged at any time